Stable and vintage selected Technology with guaranteed key component availability and flexible use of any existing or new technology with standard and upgradeable interfaces. 16bit Motorola state-of-the-art processor with reliable availability and open interface for communications). The card/product is CE-marked.
95 to 98% of all standard and most frequently used components such as detectors, automation components, controllers, censors, Electricity meters (pulses), and other components can be attached to the M2M Cards I/O or serial or CAN interfaces.
16 Multi I/O ports with full Analog and Digital functionality with jumper configuration. I/O:s are also protected with a separate fuse.
4 RS232 serial ports or 3 RS232 and 1 RS485 port with jumper configuration.
1 IrDA infrared port (or RF Radio Frequency port) or also other interfaces can be used whilst it is a serial interface.
1 CAN interface and 1Ethernet interface (full speed with additional card for the extension slot). The possibility to check the standard phone lines for interruptions.
2 Extension slots can be used to a separate Ethernet, memory or other for the card pins include Ethernet, SPI, CAN, PWR and GND.
Real-Time-Clock which provides a calendar/timer functionality.
There is also a thermal metering component on board and of course AD/DA converters for the Analog functions.
The Card has exceptionally low EMI readings and is thereof suitable for any solution/application. The card also has the 2mm thick steel casing and it complies with the strict security/safety Standard EN-50131-1 (SFS).
Lead (Pb) Acid Battery Backup no additional charger is needed. For power there are also other possibilities such as solar power for ambient solutions.
Full GSM/GPRS functionality with attached modem such as GM29 or GM28 or other. Also DTMF decoding functionality. Encoding is provided with the modem attached. GSM-SMS(text and pdu (SMSC functions), (MMS), GSM-DATA, GSM-Voice and DTMF, GPRS. Protocols currently supported for the GSM-DATA and GPRS are PPP, (SLIP), IP, PDU, TCP, ICMP, HTTP, WAP and DNS. For Ethernet there also is the ARP (low speed version).
Almost any protocols can be added to the product when needed. This development is also reasonable priced if not complimentary. This can also be done by our partners.
The Meritie M2M Platform uses a robust and open protocol to deliver/exchange data. The protocol has also remote updating possibility and error-correction/detection algorithms and light encryption available.
Card can be furnished with backup modems (land line for example) or serial port cameras (or example MMS messages with pictures.) etc.
The Cards program can be remotely or with serial port monitored/fixed and updated/upgraded.
Full configuration with the PDA software / installation file that specifies all the Cards functions easily.
Full Back-End solution with open interfaces and specifications. Back End solution does not include any expensive commercial third-party products. The solution supports all of the cards functions and communications systems with a special M2M Resolution Function to dynamically locate a M2M card in PPP networks.
Helpdesk solution is provided with 24/7/365 functionality.
If necessary only open source third-party code is used to ensure there are no royalties or disputes concerning the cards program. Overall the program is open for development. This applies both to the back-end and to the M2M Cards program. This means the customer can safely use the product and has the assurance that the development of the product/programs will go on and that there exists no third-party with rights to this product.
All educational materials are provided ready for the customer including complete manuals and examples.
The system also has a Gateway system for Control information and for Media information so the M2M cards can be used as a network that has only few modems and/or they can be seen as gateways between third-systems.
Top level
M2M